Dell Streak Unlock Instructions

Welcome to the DigitalUnlock Dell Streak unlocker. Once you have installed the unlock application, it should only take a few minutes to complete the process.

Dell Streak Unlock Instructions

Supported Models

Before you start

Exiting PDAnet

Unlock Steps for Windows

Supported Models

  1. Dell Streak 5” Black (GSM, any carrier)
  2. Dell Streak 5” White (GSM, any carrier)
  3. Dell Mini 5” Black (GSM, any carrier)
  4. Dell Mini 5” White (GSM, any carrier)

Before you start

You’ll need your USB cable:

To enter the unlock code, you will need a SIM card from another provider (ie: if you phone is locked to O2, you will need a SIM card from someone else, like T-Mobile or AT&T).

If you are running tethering software on your computer like PDAnet or other solutions, please exit or uninstall the tethering software before running the program.

Exiting PDAnet

Look for the icon in your taskbar that looks like a small PDA. It maybe be black or grey with a red X as seen below:

Click it and select “exit” to shut down the program:

Unlock Steps for Windows

  1. Download our unlocker installer from here:

Choose your device:

Dell Streak:

Download

dell-streak-install.exe

        

  1. Double-click the dell-streak-install.exe installer from where you saved it.

  1. Follow the on-screen prompts to install the application.

  1. You will be asked to install drivers for your device:

  1. The driver installation will then install the drivers. Click “Next” to continue at each step. If you are prompted to install unsigned drivers, please allow it.

  1. If you would like to unlock your phone now, leave the checkbox checked and click “Finish”.

  1. The unlocker program will launch and display the following screen as it attempts to connect to the server. If this screen stays up, you may need to disable your firewall or configure your network proxy:

  1. The main screen will then come up:

  1. If you have purchased a registration code from our site, you may enter it in the box at the top of the screen. If you have not purchased a registration code, you may continue in trial mode or purchase one now:

Choose your device:

Purchase a Dell Streak unlock from digitalunlock.com

  1. Click the “Unlock Phone” button to continue.

  1. When the program asks you to, hold the camera button on the top of the phone and click the continue button.

  1. Hold the camera button until the white screen appears.

  1. Touch the “FastBoot” box in the corner of the white screen:

Touch calibration    |            FastBoot

                     \_____________________

                     

  1. The program will run to completion and remove the unlock codes from your device. This may take a few minutes.

    If the program appears frozen, it may be unable to find the USB device. Try unplugging and re-plugging the USB cable from the phone and if that doesn’t work, a different USB port on your computer.

If this does not solve the problem, check that you are not running tethering programs like PDAnet or others. They may interfere with the unlock program and may need to be temporarily shut down or uninstalled.

  1. After your phone restarts, you will not be prompted to enter a code. This has been done automatically for you.